Tag: tools

Posted on by

27 pocket ring spanner roll

Customer email: I’m wondering if you are able to make a 27 pocket ring spanner bag?  Suitable to replace the following attached (see below)

Our reply: Thanks for your email. Are you able to take the spanners out, make it as flat as possible and then put a ruler below each row and up the side? 
We sure can make one and I will quote some time this week.
Quote: That would be $132 including postage for the same design as our Large spanner roll but in two rows and sized to fit https://www.nazbags.com.au/product/canvas-spanner-roll-large/. I have attached the colours available.

Posted on by

Tool organiser for Tool Box Lid

Tool organiser

  • 490mm wide x 320mm wide overall with a small amount taken off the corner (the box has a small curve at the corner and taking a small triangle off the corner will stop the fabric getting caught in the lid seal)
  • 12 snap fasteners on the back side (opposite side to the pockets) snaps are 15mm from the edge to the centre, 50mm from the corners and the middle ones are in the centre. (photo attached showing snap positions)
  • 8 pockets (or 7 pockets if you think the screwdriver in the middle would be better with a elastic loop instead of a pocket)
  • 3 elastic loops
Posted on by

Custom Spanner Roll

Custom Spanner Roll

The brief:

We need a replacement tool roll for our workshop spanner set. The clear pockets have perished and the spanners now fall out the bottom.

I’ve prepared a scale drawing (attached) having measured the original roll… Would also like to include a 21mm spanner.

The custom spanner roll we made is very similar to our standard canvas spanner roll but more pockets and a ripstop base.